opening a safe lock - Bar's Locksmtih

Opening a Safe Lock: The Basics of Safe Keys and What to Do if You’ve Lost Your Key

If you’ve read any of the best safe lock reviews or articles on this topic, you must have heard about the importance of a combination or key lock for your safety and how these locks are equipped with special sensors to verify the identity of the user. Without getting into detailed technicalities, let’s just say that the combination lock is your primary access point, and a key lock is secondary. In case of an emergency, if you forget your combo code or if your primary access fails, you need to have another way to open your safe. Luckily, there are several ways in which you can get inside. You can also call our Bar’s Locksmith professionals to open a safe in Pittsburgh, PA. Here are some techniques explaining opening a safe lock if you’ve lost your key.

Opening a Safe Lock – Bypass the Combination Lock

The first thing you should try with your safe lock is a manual bypass. To do this, you need to hold down the knob for about 10 seconds and then try turning the knob again. The knob will most likely turn to the unlocked position, letting you open the safe. This manual bypass method is usually applicable to combination locks with mechanical parts, and it might not work for electromechanical locks. There is a slight chance that the combination lock in your safe has frozen up and is unable to turn. In this case, you can try the next method to open the lock.

Use a Safe Drill to Open the Lock

If you have a drill and a few accessories, such as a safe bit, a drill adapter, and a long drill bit, you can drill a hole into your safe through the key lock. To do this, remove the key lock from the safe, pass a long drill bit through the key lock, and then start drilling. You’ll need to be precise with the location of the hole because you don’t want to damage your safe or the lock. Once you’ve made the hole, you’ll need to put the key back into the hole and turn it. The key should turn to the unlocked position, and you should be able to open the safe. If the key doesn’t turn, you may have to repeat the process a few times before it works.

Opening Of Safe Lock – Bypass the Key Lock

Another way to open a safe that has a key lock without the key is to bypass the key lock. One method involves using a wire and winding it around the keyhole so that the key cannot retract into the safe. Another option is to use a solvent to dissolve the key, making it useless. Be careful when using solvents, however, as they can damage the lock in your safe. If you need any help you can also contact our locksmith Homestead, PA.

Use an Electronic Bypass Tool to Unlock Safe!

If you have a safety lock that has an electronic keypad or a biometric sensor, you can use a bypass tool to open the safe. These bypass tools can read the code or identify your fingerprint, allowing you to open the safe. You can purchase bypass tools online and at some hardware stores. These bypass tools are useful if you have a safety lock that uses electronic ID verification but doesn’t have the key code. You can manually enter the code with the bypass tool. These bypass tools also come in handy if the key code or biometric sensor in your safe lock is broken. Sometimes, the sensor or code can fail, so having an alternative way to open the safe can be a lifesaver.

Cracking A Safe – What to Do?

Although it requires more skill and experience than simply pulling on the roots, safe cracking is a safer option because there are fewer chances of damage to the cannabis plant and no chance of injury. Special gloves should be worn when safely cracking cannabis plants to prevent any contact with skin or mucous membranes. Make sure that gloves are not too tight and that they offer good protection against chemicals and toxins in the air and soil. Be sure to keep all surfaces clean when you’re working with cannabis plants so that no pathogens or other organisms contaminate your work area. Call our locksmith Pittsburgh experts. We use proper tools for opening a safe lock. You will be happy when we will open your safe safely.

Choose Us For Opening a Safe Lock in Pittsburgh, PA!

A safe is a great investment for both businesses and homeowners. Safe locks are a necessary part of this investment, but they do break or stop working sometimes. Fortunately, there are several ways in which you can open a safe lock if you’ve lost your key. If you follow the tips above, you should be able to open your safe, even if you’ve lost the key. It’s a good idea to keep a backup key in a safe place just in case you lose it again. If you are not able to open your safe, then contact a reputable company like Bar’s Locksmith for opening a safe lock.

Skip to content